FlightGear has a seamless, continuous oblate ellipsoid world available for you to explore. Our terrain is based on 90m SRTM data and is very detailed. There are over 20,000 airports you can visit world wide. You can download 10×10 degree chunks of the world, run a utility called terrasync to fetch scenery as you fly (just in time), or purchase the entire world on a 3 DVD set.
Access a flight simulator with multiple features. Select one of the authentically recreated aircraft and control them during takeoff, flight along the chosen route, and landing in a designated area. Check out realistic controls compatible with different joysticks and keyboards.
FMS 22.214.171.12428 can be downloaded from our website for free. This free software was originally created by Roman & Michael Möller. Our built-in antivirus scanned this download and rated it as virus free.
If you purchased RealFlight 9.5S at any time you will receive a free copy of RealFlight Evolution! Internet connectivity is required to download the software via Steam after RF Evolution is released on October 28th, 2022.
This is the best RC Flight Simulator that you can download for free! I went to a professional hobby shop for RC's and other hobbies and even they had this program. My grandfather flew RC planes and a ...
Accept the user agreement and click Continue once again. It is highly recommended that you leave the box for sending anonymous usage data checked. This allows Laminar Research to gather anonymous data to make updates to the simulator based on how you use it.
Accept the user agreement on this screen. It is highly recommended that you leave the box for sending anonymous usage data checked. This allows Laminar Research to gather anonymous data to make updates to the simulator based on how you use it. Click Continue once again.
If someone manages to steal your product key, piracy is prevented by fraud detection; our servers will see your key being used in a pattern that looks like multiple people (e.g. your key used from two continents at the same time) and it will be locked. Downloading the product repeatedly may appear to be piracy and may also cause your key to be locked. You can contact X-Plane customer support if you experience problems with your digital download product key.
Some of the key functions of the simulator are accessed through small icons on the right side of the menu bar however. From left to right, clicking the icons will: pause the simulator, open Flight Configuration, show the ATC window, show the map, open Settings, and open a help webpage. Keep in mind you can use keyboard shortcuts to access many of these features as well.
The Graphics screen is used to configure the level of detail in the simulator. This window can be found by moving the mouse to the top of the screen, clicking on the settings icon, and clicking Graphics.
When downloading a custom aircraft, it will typically be in a compressed folder (usually a ZIP file) that contains the airplane and all its various paint jobs, airfoils, custom sounds, and instrument panels. Once the compressed folder is downloaded, you should be able to double-click on it to open or expand it on Macintosh, Windows, or Linux computers.
To modify the order of scenery packs, open the scenery_packs.ini file with a text editor of your choice, and simply move the scenery pack line to a different location in the list (i.e., higher for those packs you most want to see and lower for those it is less important to see). Additionally, the XAddonManager utility may be helpful for managing a large amount of custom scenery or downloaded objects.
If you need help with a certain aspect of the simulator, open the menu and check for a question mark icon in the right corner. Click on the icon to open a webpage with additional information and instructions about the screen you are currently viewing.
X-Plane is the most comprehensive and powerful flight simulator available. As such, there are a great number of features available that go beyond simply taking off, flying around, and landing. These include tools like the logbook and checklists, and features like equipment failures and damage modeling.
An Instructor Operator Station is a sort of console used by a flight instructor or someone standing in for an instructor. This console can be used to fail multitudes of aircraft systems, alter the weather and time of day, or relocate the aircraft. The IOS can be run on a second monitor on the same computer as the simulator.
A glider pilot must watch the wind and the slope of the terrain carefully to hold inside the upward-moving currents of air, using the lift of the air flowing up the mountain slope to hold the craft aloft. With a good 25-knot wind set in the simulator, you can get a nice, free elevator ride to 10,000 feet when flying along the windward side of a nice, steep mountain. This is called ridge lift.
In general, using multiple displays on one computer will be more restrictive regarding the ways in which you can configure the simulator. Networking many computers together will be more flexible, but it will also be much more expensive.
Now, sometimes people sit on the ground and see the horizon does not line up, so they enter vertical offsets on some of the display machines only in order to get the horizons to line up. They quickly become confused when everything breaks down as they pitch and especially roll. If vertical offsets are used, they must be used on all networked machines in your simulator, unless you have one monitor physically above another. If some but not all of your computers have vertical offsets, things start getting messed up. What often happens is that a user will fly with a cockpit in the center screen, which shifts the center of that screen as far as scenery is concerned to be around 75% of the way up the monitor; this is done in order to leave room for the instruments. The external visuals, on the other hand, have screen centers in the center of the monitor, since they do not have to reserve space for the instrument panel. In this case, you need to do the following:
If you have to contact Laminar Research customer support, we will only require the last eight digits of your digital download product key; you do not need to send your full digital download product key to anyone, including Laminar Research.
Update: To update a piece of software is to convert it to a newer version. This should be done every couple months or so in order to take advantage of new features in the simulator. To update in X-Plane, a user first downloads and then installs a newer version. The updater program (available for free at X-Plane.com) does both of these things for you very easily.
How can I retrieve my downloads ?If your account cannot be found or is empty or missing downloads, please follow the link HERE.This concerns downloads ordered on our former website up to end of January 2011. The current and future downloads will appear on this new website only : My Account page (upper right corner).Important : as soon as downloaded, please make a back up copy of the files and their keycodes.
Download error messageIn your account, you get the following error message when you try to download a purchased product :AccessDeniedAccess DeniedThat means that you are trying to download an old version that is now disabled. Look at the other download files and download the latest version.
If you don't find answers to your technical questions, please fill in the SUPPORT FORM below.For download products, we are unable to refund/change if you find the product too complicated or unsuitable for your personal use.
Name of the installer .EXE file Please indicate exact filename of the installer EXE fileof your product version (either the name of the downloaded EXEWithout this information we can not help you.
If the newest version of HELI-X does not work on your hardware you can try Version 4.2. Only OpenGL 1.2 is required. And it can be used on older PowerPC Macs. It is a free functional demo version (4 helicopters, 1 quadrocopter). If you like it, you can upgrade to a full version. The download size is approx. 600 MB.Windows 32 und 64 bitMac OS-XLinux
The PC Trainer Suite Launcher provides the simplest experience for installing your Garmin Trainers and keeping them up-to-date. Once installed, select the avionics trainer products you wish to use, and the Launcher will download them automatically. A high-speed internet connection is recommended. If a reliable internet connection is not available, please see Offline Installation below.
For trainer installation without the use of an active internet connection, install the offline version of the Trainer Launcher and Databases, then download and run the installer for each avionics trainer product you wish to install.
Save the GarminTrainerSetup zip archive file to your computer: Choose a location where you can easily locate the file once the download is complete. The file may take 5-30 minutes or more to download, depending on internet connection speed. A high-speed internet connection is recommended.
The setup wizard will take you through the process of selecting the avionics you wish to install and download the necessary components. This process may take 5-30 minutes, depending on internet connection speed. A high-speed internet connection is recommended.